DC Top-Cool Roof Mount Air Conditioners

PRP Inc. is proud to offer the DC Top-Cool roof mount air conditioners by DC Power Solutions. The most technologically advanced 12 and 24-volt dc powered air conditioners for vehicles.

Features of the DC Top-Cool include:

  • Cools without engine idling.
  • Up to 12,000 BTU/h of cooling.
  • Initial rapid cool down to reach optimum temperature quickly.
  • Runs off starting or auxiliary battery 12 or 24 volt systems.
  • Quiet operation - sound dampening insulation.
  • Easily installed self-contained unit - AC technician not required.
  • Cycles on and off - adjusts to changes in temperature.
  • Temperature controls located inside the cab.
  • Equipped with a battery monitor and control which prevents dischargin below voltage required to start engine.
  • Factory pre-charged, environmentally friendly, R134A coolant
  • Refrigerant coolant level indicator
  • Can be used in conjunction with fuel-fired heaters
  • Extensively tested

Options of the DC Top-Cool are:

  • Metal housing for severe condition applications.
  • Data logging - monitor operating times.

Benefits for truck sleeper cabs, service vechicles and recreational vehicles:

  • Compliance with anti-idling regulations.
  • Overnight anywhere without shore power.
  • No generator required.
  • Reduced operating costs.
  • Reduced fuel costs.
  • Reduced engine wear.
  • Extended maintenance intervals.
  • Reduced downtime.

Benefits for off-road, construction and transportation equipment, hybrid and electric vehicles:

  • Electric air conditioning for even low HP equipment.
  • Cooling whether engine operating or not.
  • Full cab rotation.
  • No hydraulics.
  • Complies with pending anti-idling regulation.

Benefits for emergency and mobile command vehicles:

  • Cool patient or operator compartment without idling.
  • No generator required.
  • Reduced operating costs.
  • Reduced fuel costs.
  • Reduced engine wear.
  • Extended maintenance intervals.
  • Reduced out-of-service time.
Specifications
Model Cooling Output Operating Mode Nominal Input Net Weight
 DC Top-Cool 12 Volt 6,000 BTU/h Economy 40 amps* - 480 watts 126 lbs / 57 kg
 DC Top-Cool 24 Volt 6,000 BTU/h Economy 40 amps* - 480 watts 128 lbs / 58 kg
 DC Top-Cool 12 Volt 11,000 BTU/h High Rate 81 amps - 972 watts 126 lbs / 57 kg
 DC Top-Cool 24 Volt 11,000 BTU/h High Rate 54 amps - 1296 watts 128 lbs / 58 kg

All units shipped in economy mode, and are easily field upgraded to high rate mode. To provide maximum initial cooling in economy mode, the DC Top-Cool start current draw (programmed for 1 to 10 minutes) is 54 amps @ 24 volt or 81 amps @ 12 volt. For example, depending on the ambient temperature and with the thermostat set at maximum cooling, the 24-volt unit will draw 54 amps for 1 to 10 minutes at start-up and then cycle on and off drawing an average of only 27 amps per cycle.

Test data can be provided for specific applications upon request.