Dc Flex-Cool Split Unit air conditioner

PRP Inc. is proud to offer the DC Flex-Cool Split Unit air conditioners by DC Power Solutions. The most technologically advanced 12 and 24-volt dc powered air conditioners for vehicles.

Features of the DC Top-Cool include:

  • Cools without engine idling.
  • Up to 11,500 BTU/h of cooling.
  • Initial rapid cool down to reach optimum temperature quickly.
  • Runs off starting or auxiliary battery 12 or 24 volt systems.
  • Quiet operation - sound dampening insulation.
  • Easily installed self-contained unit.
  • Cycles on and off - adjusts to changes in temperature.
  • Temperature controls located inside the cab.
  • Equipped with a battery monitor and control which prevents discharging below voltage required to start engine.
  • Refrigerant coolant level indicator
  • Can be used in conjunction with fuel-fired heaters
  • Extensively tested

Options of the DC Flex-Cool are:

  • Metal housing for severe condition applications.
  • Pre-charged hoses with R134a coolant.
  • Data logging - monitor operating times.

Benefits for truck sleeper cabs, service vechicles and recreational vehicles:

  • Compliance with anti-idling regulations.
  • Overnight anywhere without shore power.
  • No generator required.
  • Reduced operating costs.
  • Reduced fuel costs.
  • Reduced engine wear.
  • Extended maintenance intervals.
  • Reduced downtime.

Benefits for off-road, construction and transportation equipment, hybrid and electric vehicles:

  • Electric air conditioning for even low HP equipment.
  • Cooling whether engine operating or not.
  • Full cab rotation.
  • No hydraulics.
  • Complies with pending anti-idling regulation.

Benefits for emergency and mobile command vehicles:

  • Cool patient or operator compartment without idling.
  • No generator required.
  • Reduced operating costs.
  • Reduced fuel costs.
  • Reduced engine wear.
  • Extended maintenance intervals.
  • Reduced out-of-service time.
Specifications
Model Cooling Output Operating Mode Nominal Input Evaporator Net Weight

Condensor Net Weight
 DC Flex-Cool 12 Volt 5,800 BTU/h Economy 46 amps* - 550 watts 29 lbs / 13 kg 108 lbs / 49 kg
 DC Flex-Cool 24 Volt 5,800 BTU/h Economy 28 amps* - 675 watts 29 lbs / 13 kg 108 lbs / 49 kg
 DC Flex-Cool 12 Volt 11,000 BTU/h High Rate 86 amps - 1050 watts 29 lbs / 13 kg 108 lbs / 49 kg
 DC Flex-Cool 24 Volt 11,500 BTU/h High Rate 57 amps - 1350 watts 29 lbs / 13 kg 108 lbs / 49 kg

All units shipped in economy mode, and are easily field upgraded to high rate mode. To provide maximum initial cooling in economy mode, the DC Flex-Cool start current draw (programmed for 1 to 10 minutes) is 57 amps @ 24 volt or 86 amps @ 12 volt. For example, depending on the ambient temperature and with the thermostat set at maximum cooling, the 24-volt unit will draw 54 amps for 1 to 10 minutes at start-up and then cycle on and off drawing an average of only 27 amps per cycle.

Test data can be provided for specific applications upon request.